|
Re: 86 chevy crew cab 12 valve swap
I put relays on the starter trigger wire, pull in, and 2 on the hold in on my 72. I have done several without relays but am trying to better my work.  I feel the wiring and components will last a lot longer using relays to operate them.
If you only use one relay, make sure it is a large one. I believe the hold in pulls 40amps initially and tapers off to 15-20amps during holding. (I can't remember those specs 100% though) Ryanroo probably has them in his storage bank.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|