Quote:
Originally Posted by lowrodderchev
Man I'm full of questions and a really appreciate all your guys help. So if I switch to a 241 case will I have to modify my cross member? If so what transfer case would you recommend to use to avoid modifying the cross member thanx again
|
I'm not sure of the specifics on mounting location difference from the 205 you have to the 241. The beauty here is if it's further back on the 241 vs the 205, just move the crossmember back to adjust. Worst case, get the 241 crossmember from the same truck you got the 241 from. At most you might need to drill a couple of holes in each frame rail to either slide the old one back or fit the 241 crossmember in.