Quote:
Originally Posted by First c10
I adjusted and adjusted and adjusted while I was getting the cab corner and the rocker aligned.
It's a lot better but still too close. I am going to finish getting the cab door and fender aligned and than I will address the window frame and/or A pillar.
|
Same thing happened to the passenger side of my cab. The top rubs the pillar with a huge gap at the rear. Previous owner did a rocker repair and I suspect the rear of the cab sagged when he cut it out. I believe the same thing has happened here. Cut loose the rear of the rocker and also where the cab meets the floor. The front of the cab will have to be pulled forward while the aft is picked up. Not sure if this makes sense but it should close up that rear gap and give some room in the front. Then the door will need readjusted. I haven't repaired mine yet but I think I'm gonna use a porta power in conjunction with cargo straps ,pushing and pulling. I hope some of this made sense
