[jokerz71]

First & foremost,you will need the controller.There are several vendors to choose from.A few are GM themselves,TCI, U.S. Shift. You will need a tach signal to the controller along with a TPS(throttle position sensor)mounted onto your carb linkage.The worst part of what you are trying to do is dealing with the speedo.The 4L60E uses a VSS to send pulses to the controller to run an electronic speedo.There is no provision for a mechanical speedo.There are conversion kits to do this,but,they are very expensive(approx. $500).It may be better for you to consider a 700R4.Just depends on how much you wanna put into it.