The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - LS3

Andy4639 · 01-14-2016, 08:38 PM

I have seen a coil setup that mounts underneath the headers on the frame. The plug wires all run straight down. Very clean looking.

I have also seen them mounted on the backside of the intake which by the pictures you posted would be a good time to make a bracket for them and route wiring.

On another note, what the plan for that power steering reservoir in the way of the throttle body?

01-14-2016, 08:38 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: LS3 - Power Steering & Coil Relocation I have seen a coil setup that mounts underneath the headers on the frame. The plug wires all run straight down. Very clean looking. I have also seen them mounted on the backside of the intake which by the pictures you posted would be a good time to make a bracket for them and route wiring. On another note, what the plan for that power steering reservoir in the way of the throttle body? __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.