Re: No Limit Trailing Arm Rear Suspension
Step 1. Get dirty and noisy. You need to remove the OE front trailing arm mounts. There are six rivets in each. Drill, cut, burn.... however you like. I like to use a scarfing tip on a torch, but most will find it fairly easy to center punch the rivet, first drill all the way though with a 1/4" bit, then use a 7/16" or 1/2" bit to cut the head off. Once the bracket is, grind the rivet shanks smooth and punch them out. The new front mounts bolt into the same holes. We provide two extra holes that you can drill and bolt in as well. All hardware is provided.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
|