View Single Post
Old 03-17-2016, 09:25 PM   #13
suburban99
Registered User
 
suburban99's Avatar
 
Join Date: May 2014
Location: Mission BC
Posts: 452
Re: 5.3 4L60 swap into a 1962 c10 first drive...

More info:
MAP was very dirty, I cleaned it and it appears to work.
MAF cleaned.
Repaired EGR block off plate.

Unfortunately still has no power when warm.
Here's some info from my Bosch scanner live data:
No codes present
Fuel sys 1 closed
Fuel sys 2 closed
Coolant temp 198
IAT 73
Idle 586
MAP 10(HG) at Idle and 7.4 at 2000 rpm
MAF .70 at idle and 1.70 at 2000 rpm
MIL off

I don't know what fuel sys 1 and fuel sys 2 means .
(in fact I did not know my scanner did live data till I read the book.. )
Any help appreciated, I am stumped..
suburban99 is offline   Reply With Quote