Quote:
Originally Posted by Danger D
What does it do, and would I need it for my application?
|
If your revving over 5500 RPM, A .030" Bleed Hole in the edge of the Drum along with High Rate Direct Return Springs are required. These two things keep the Direct from "Soft Applying" in 1st & 2nd gears, Soft Applying burns the Direct clutches.
The Overdrive Sprag & Overdrive Planetary Carrier will not like WOT shifts into 4th with 1200HP.
CK has a Billet OD Carrier....
http://www.ckperformance.com/View/4L...NETARY-CARRIER
HAS TO BE USED with a '91-'96 Overrun Clutch housing & Sprag! The Early OD Sprag is larger than the '97 & version.
You will also need....
Billet Input Shaft.
Billet Forward Clutch Hub.
These two are optional, But over 1000hp are Recommended.
Billet Main Shaft.
Billet Sun Gear Shaft.