the basics from my swap are
L33 5.3
earlier 2wd 4L60e
99-02 PCM
99-02 Cable TB
prevatt harness
dakota digital speedo drive
dakota digital tach signal converter
old air a/c
the truck drives just fine.
im testing it every which way i can with a multimeter.
i tested all the leads with the key on and the key off
im testing voltage at the connector when its unplugged from the cruise module
im testing voltage at the connector when its plugged into the cruise module
im testing the wire tie in points with the connector plugged in and unplugged
etc etc.
i think im going borderline insane because i cant figure this out...