Re: What size fuel filler hose?
As stated above the hose is 1 3/8", got mine from filler neck supply. Problem with the replacement tanks is the filler neck is only a straight 2-3 inch piece, so you have to replace it with the original 2 or3 bends, that the original neck has, get it lined up with the hose, the hose can be straight as it only requires a slight bend to get it on the filler neck
Use tin snips to remove old filler neck, then you can safely remove solder with heat, and the 2 bolts holding it on to the old piece of tank that you removed with tin snips
__________________
Semper Fi...Uncle Sam, you da man
All parts offered to help are free, unless otherwise noted
Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST
AS usual, off topic
They say your mind goes second, can't remember the first
Jim
|