Re: 64' K10 Project Long Bed
In the front spring rear eye, installed all the parts on one side, as this allowed me to use the nut as a way to turn the pin into the spring eye threaded bushing. Next placed the spring with shackle onto the frame pin, installed lock washer and nut. Through out the install used lots of grease on both threads, along with lots of grease through the grease fitting. Making sure the bushing and pin threads were full of grease, to ensure minimal wear of these parts. Regular greasing will be needed as truck is driven.
Last edited by aotte1; 04-21-2016 at 12:00 AM.
|