The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - IA 1977-86 6-port dual tank harness kit! NEW!

*gmachinz* · 05-03-2016, 01:16 PM

I now have a limited supply of GM/NOS Pollak fuel selector valves and a NEW replacement harness. Included with this kit is the under dash harness section and the exterior, underbody harness to the selector valve and the 6-port valve itself.

The selector valve is NOT an offshore or sub-standard universal part-it is a genuine Pollack valve who manufactured them for GM originally. Don't put up with a spliced, sectioned or otherwise compromised dual tank harness/fuel valve-finally you can get a completely new kit! Other aspects that my harness includes are a higher temp chemical resistance look than GM, galvanized and insulated clamps (these secure the crossover section of the harness) and j1128 rated cross link automotive Delphi wiring as opposed to the oem acrylic jacketed wiring.

Price is $235 for each kit. This kit will serve any GM truck using a 6-port valve whether it's stock originally setup or if you're converting to one. Price is the same for short box, long box or crew cab. You need to let me know what style you need and how many.

No interest? These will work as a complete kit in 77-up trucks....this is the later design 6-port valve and all NEW better than OEM wiring!

05-03-2016, 01:16 PM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	1977-86 6-port dual tank harness kit! NEW! I now have a limited supply of GM/NOS Pollak fuel selector valves and a NEW replacement harness. Included with this kit is the under dash harness section and the exterior, underbody harness to the selector valve and the 6-port valve itself. The selector valve is NOT an offshore or sub-standard universal part-it is a genuine Pollack valve who manufactured them for GM originally. Don't put up with a spliced, sectioned or otherwise compromised dual tank harness/fuel valve-finally you can get a completely new kit! Other aspects that my harness includes are a higher temp chemical resistance look than GM, galvanized and insulated clamps (these secure the crossover section of the harness) and j1128 rated cross link automotive Delphi wiring as opposed to the oem acrylic jacketed wiring. Price is $235 for each kit. This kit will serve any GM truck using a 6-port valve whether it's stock originally setup or if you're converting to one. Price is the same for short box, long box or crew cab. You need to let me know what style you need and how many. No interest? These will work as a complete kit in 77-up trucks....this is the later design 6-port valve and all NEW better than OEM wiring! Attached Images Last edited by gmachinz; 07-14-2016 at 09:13 PM.