The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 05-30-2016, 09:59 PM

What is this 1995 4L60E out of?? If it is out of a Pick-up/SUV/Van....It will not have a TCC PWM Solenoid & would be a reason for no TCC Apply. Even if it is a '95 Passenger Car 4L60E, It will have a PWM 3-2 shift solenoid where you need a (On/Off) type 3-2 shift solenoid, Running a PWM 3-2 with your PCM will eventually burn the 3-4 clutches down.

As far as I know......No (Segment) exist to run a '93/'94/'95 4L60E with a Gen III PCM.

To fix this correctly, Swap a '96-'08 4L60E Valve Body, Harness, & Separator plate over to your transmission, I have done this on several Impala SS/Caprice/Roadmaster/Fleetwood with LS engines swapped in, Works great!
It's a couple hour job, I will be glad to walk you through it. I also have a '03 Corvette/HP AC-Delco reman Valve Body in the box for cheap if you need one, I will throw in a good '98-'02 F-Body plate & gaskets. PM me if interested.

05-30-2016, 09:59 PM	#2
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: 1995 4l60e the BA$TR3D child What is this 1995 4L60E out of?? If it is out of a Pick-up/SUV/Van....It will not have a TCC PWM Solenoid & would be a reason for no TCC Apply. Even if it is a '95 Passenger Car 4L60E, It will have a PWM 3-2 shift solenoid where you need a (On/Off) type 3-2 shift solenoid, Running a PWM 3-2 with your PCM will eventually burn the 3-4 clutches down. As far as I know......No (Segment) exist to run a '93/'94/'95 4L60E with a Gen III PCM. To fix this correctly, Swap a '96-'08 4L60E Valve Body, Harness, & Separator plate over to your transmission, I have done this on several Impala SS/Caprice/Roadmaster/Fleetwood with LS engines swapped in, Works great! It's a couple hour job, I will be glad to walk you through it. I also have a '03 Corvette/HP AC-Delco reman Valve Body in the box for cheap if you need one, I will throw in a good '98-'02 F-Body plate & gaskets. PM me if interested.