Thread: Restoring Rusty
View Single Post
Old 06-18-2016, 07:51 PM   #4204
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,922
Re: Restoring Rusty

Be careful
GM oil pressure gauge senders are 0Ω=0PSI and 90Ω=max PSI.
Autometer, like the 1.5" gauge on my ATV, uses senders where 235Ω=0PSI and 0Ω=max PSI. Not sure who makes the Summit gauges but it appears they may be Autometer units or clones.

The way to be sure is to test the Ohmage with the sender installed and the engine running or with the sender installed on a pressure source.
It's a pressure transducer that converts pressure into resistance... There's no rule that says you can't screw the sender into a female thread Milton air hose disconnect fitting and attach it to your compressor hose, with the air hose regulator dialed down to between 30 & 60PSI or so, and observe what the ohmage does.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.

Last edited by hatzie; 06-18-2016 at 08:01 PM.
hatzie is offline   Reply With Quote