Quote:
Originally Posted by dwcsr
We have it in and its a whole lot better steering than it was. It is about an 1/8" from the stops. We did have to use Tbrid inner tie rods EV117 and cut them about 3/4' on each end. The rod end were 7" long from a 93 corvette re-tapped to fit the tie rods. On a very tight turn it does scrub a bit but its only when its up against the stop. we do need to raise it 1.5".
|
I am still tinkering on my install and have taken a couple short trips around the neighborhood.
One thing I noticed is the steering radius sucks. I see you replaced the inner tie rod ends.
What was the reason for that?
Thanks!!