Re: Factory Body Shimming
Quote:
Originally Posted by Ebully72
Yes the top is still on . The metal there isn't horrible could have driven it the way it is. Rocker boxes in tact, some 1" holes in the rocker.
|
Then I would think you could start replacing the rockers and floor. Like CapeCodder says keep everything aligned as you go....then there shouldn't be much shimming to get the gaps adjusted.
__________________
1967 C10 Step side
1968 C10 Step side
1970 Chevrolet K/5 Blazer
1972 Chevrolet K/5 Blazer
.............
|