Re: My 50 roadster pickup build
When the new screen comes up go down to line 5 "Crank IAC", press edit, and another screen will come up (sorry no pic), but once that screen is up, it will show 100, press clear and then enter 75, then send to ECU, it should come back as "Suceeded". Now it is in the ECU, so shut off the key for 30 seconds to 1 minute and then your set. Anytime you send new info to the ECU it will be there, but not saved until the key is shut off, then it is saved.
Hope this may help someone, and sorry it took me so long to explain...Jim
Last edited by oldman3; 10-18-2016 at 10:51 PM.
|