|
Re: LT1 GenV swap
site is frustrating with this 30 minute editing policy.. so, another post
this is basically what I'm going to aim for as far as fit/form/function except the top of the pump reservoir more parallel like my picture.. damn aesthetics 
after a little searching, this tensioner seems to be the exact same as the 2014 Silverado, but tensions the belt the opposite direction... but the tensioner base is not flush with the pulley, like I had hoped for. If it happens to be the same as the Silverado's, even at a 1/4 plate bracket would be right at the edge if not over the edge of the pulley from my eye balling things.. might make a trip to the autoparts store and compare if they have these in stock. I doubt they will order a part just to let the customer see it...
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|