Quote:
Originally Posted by pedro6371
hi mike nice truck just couple quick ? I'm building similar front set up instead I'm using a manual rack don't know how is going to work try and error well like to know how did you run your front air lines and did cut or notch the small pipe inside of the pocket thanks in advance.
|
I drilled a hole in the top of the spring cup with a carbide hole saw and then trimmed out the inside with a small sawzall blade.
I drilled a hole in the back side of the spring cup and ran the air line out. I drilled the hole big enough to sleeve the air line with rubber hose to make sure it was protected from any abrasion.
Hope this helps. Good luck.