Re: Best 4" lift for big block V6 GMC and pics?
Hi, I have a 67 Chevy K-10. A few years ago, around 1996 I changed the 1/2 ton springs for 3/4 ton springs along with shocks. this gave me about 2" of lift. Now many years later I am rebuilding the truck again. It is a driver. The front springs have settled 1/2 inch over time. I carefully measured it out before pulling the engine. I intend to build 3" blocks to go between the rear axle and springs. 3 1/2 inch blocks for the front. Then I will figure out what length of shocks I need. The steering will be another issue to get set up as well. I think it will work. I will use new U-bolts too.
I will get you some detailed pictures as I get deeper into it.
|