The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Can anyone kindly ID these three parts please?

Andy4639 · 11-13-2016, 08:18 AM

Why is it when add on electrical connections like in your picture on the brake wires people feel they need to address them. That wire could be for anything!
I don't address things like that in my answer's for one reason. I have no idea what the person who installed it was doing. The wire could be for a third brake light. Who knows what it's for.
I have been working on these trucks for over 30 years and I have seen stuff that I had no idea why it was wired as it was are how in the world it even worked.

And yes this is the same thing.
dreaded ignition reverse and drive starter lock out circuit

Neutral safety switch and back up light switch!

11-13-2016, 08:18 AM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Can anyone kindly ID these three parts please? Why is it when add on electrical connections like in your picture on the brake wires people feel they need to address them. That wire could be for anything! I don't address things like that in my answer's for one reason. I have no idea what the person who installed it was doing. The wire could be for a third brake light. Who knows what it's for. I have been working on these trucks for over 30 years and I have seen stuff that I had no idea why it was wired as it was are how in the world it even worked. And yes this is the same thing. dreaded ignition reverse and drive starter lock out circuit Neutral safety switch and back up light switch! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.