The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*gmachinz* · 11-17-2016, 12:12 PM

I have the diameters of the hole saws used and their locations.....it's not hard...locate the outer dimple as shown-drill all the way thru both panels with an 1/8 drill bit for example, then use the hole saws.

11-17-2016, 12:12 PM	#55
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 1978 gmc c35 454/th400 loaded I have the diameters of the hole saws used and their locations.....it's not hard...locate the outer dimple as shown-drill all the way thru both panels with an 1/8 drill bit for example, then use the hole saws.