[ls60apache]

hello Vinceg I haven't had the lights fuctional,but to address that problem I have LED lights and the wiring will come out the top of the housing and attach to hinge so the wires will pivot at the top with no pulling. i did weld in some flat bar steel to support where I cut out some of the metal for the filler tube from s10 blazer. im gonna form some sheetmetal to make a box to go around the cap. I also cut a section out in the inner panel for access, now I wish I had done that a differently. I will figure that out when I modify the inner panels or wheel tubs for more tire clearance. altogether it wasn't a difficult process just time consuming.most of that time was spent trying and modifying different junk yard hinges. thanks!