[HarrisonsRodShop]

Here are some pics now that the motor is in and parts are going back on..... I plumbed the carb and heater hose to the intake with Fragola AN fittings in Black. I use their push lock ends and put a Gates heat shrink clamp on them basically to make them look finished since no clamp is really necessary with Push Lock. I prefer the look of rubber line on the clamps personally. I just like the idea of no screw clamps. I put the motor back in with a B&M 2200 stall converter and SFI Flexplate. I also installed a trans cooler in front of the radiator and split the trans off on its own cooler. The truck had a fresh old style TH-350 with a shift kit so I left it alone. Hopefully the starter arrives tomorrow and we can make noise Thursday morning. Later folks! BH