Here are a couple pics of my truck next to a C10.
My tires are 35 x 12.50 x 16 Super Swamper SSR's on 16 x 8 rims.
The front lift is a combination of 4" Tuff Country lift springs up front with an added 3/8" spring and I have also added a center pinned lift block that has 2 1/2 degree angle in it. The block is 5" long, 2" wide and roughly 1 1/4" tall, measured at the center of the axle. From the top of the tire to the highest point of the front wheel well measures 13".
The back suspension consists of Offroad Design's Shackle Flip which gains 4" of lift using the stock springs. Recently I pulled out a broken leaf and added 2 1/2 inches of additional leafs to gain some weight hauling capacity. That netted a total of 7 1/2" rear lift.
------------------
1969 C20 4x4 with roughly 6" lift and 35's
residing near Rose Hill, Kansas
Yukon Jack's Web Pages
[This message has been edited by Yukon Jack (edited March 01, 2002).]