|
Re: LT1 GenV swap
Motor mounts checked off the list
The 1st aluminum motor mount adapters turned put to be usefull. A heat sink/fixture to help prevemt the plate from warping. If I were to have used them and the stock 3bolt bracket, it put the valve cover wicked close to the brake booster. I lowered the motor enough to give the driveline angle about 3-4* and have the trans pan barely below the frame rail. Also keeps the vacuum pump and stock ac compressor. Win win.. When the motor comes out for the last time, I'll hit it with some paint.
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|