Quote:
Originally Posted by Jstock85
HG I got the walbro 342 and an 87 sender unit. I got a problem with the wires matching up. Did you have this same problem?
|
There is a post from 2/22 showing my pump and sending unit wiring. Basically you have 2 wires for the pump and 2 for the level indication. You can use a common ground. On the outside I think the ground can go directly to the frame. Depends on how the power lead for the pump is. Some use a ground wire to the pump, some don't. They use a chassis ground. I've seen both.
Posted via Mobile Device