Quote:
Originally Posted by Hop
Not sure if this has been addressed. looking to add coil overs. Are new upper and lower control arms required or will the current setup met my needs. 64 Step Side 2 1/2 spindle w/3 in drop spring in front, 4 in drop spring in rear. I want to lower the vehicle another inch all around without changing much.
|
Quote:
Originally Posted by mcmlxix
Check out this video. It's designed for a Chevelle but will give you an idea how to mount some coil over in the front of the truck.... You'll see the space needed and your upper arms probably won't work. The lowers could be made to fit a center mount lower shock but strength and longevity would be called into question on a factory stamped arm.
https://youtu.be/yYhvHzN3B-g
There's companies that make arms, check to see what Rob from No Limit offers and RideTech comes to mind as well. Michigan Metal will make custom arms (and uprights for that matter) www.michiganmetalworks.com
|
RideTech makes a complete coil over suspension for the '63-'72 Chevy Trucks. I believe that the front set up is also offered separately.
http://www.ridetech.com/store/product-3296.html