The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - "1950 GMC" -Charlotte

99 to Life · 06-26-2017, 09:41 AM

nice reuse of parts on the tunnel. I would also second that crease on the pass side for sure was from the door. My 51' has the same crease. your DS crease is prolly not from the door as its too close to the pillar. I used s10 brake on one truck and a fullsize on another truck. The s10 is ok but it makes the booster mount a iddy bitty bit low for my liking. you could always extend your arm on the pedal. I had to do that on current build, using a corvette brake assembly. I wouldn't recommend using that.

06-26-2017, 09:41 AM	#136
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: "1950 GMC" -Charlotte nice reuse of parts on the tunnel. I would also second that crease on the pass side for sure was from the door. My 51' has the same crease. your DS crease is prolly not from the door as its too close to the pillar. I used s10 brake on one truck and a fullsize on another truck. The s10 is ok but it makes the booster mount a iddy bitty bit low for my liking. you could always extend your arm on the pedal. I had to do that on current build, using a corvette brake assembly. I wouldn't recommend using that. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com