Did I send you a .700" bore clutch master with your kit? If so, does the clutch disengage enough?
Quote:
Originally Posted by 72c5
I used -4 AN 36" AFCO hose (pn 40280) with a -3AN to -4 AN fitting, but could've used a few more inches of hose. The 36" hose worked, but just barely. Another 12" would give you more options to route the hose in a neater fashion.
For my 2006 NV3500 I used the stock slave clutch cylinder out of a 2006 Silverado 1500 4.3L, Rockauto part number 360128.
Posted via Mobile Device
|