Thread: Restoring Rusty
View Single Post
Old 12-04-2017, 10:40 PM   #5321
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,815
Re: Restoring Rusty

First of all, all excellent questions, I am no POR15 expert but I have used it a few times now.

Quote:
Originally Posted by blindbug View Post
I have questions:
• I've heard from reviews that the POR 15 tends to lighten in color, turning a purple color (or even pinkish) when exposed to UV light... any thoughts on your application?
I am not sure POR 15 was designed to be out in the sun, they make different products some are meant to be painter over, some are to be hidden under the vehicle like their chssis black, or hidden in the engine bay under the hood, is my understanding.

I have not seen mine turn purple, but I had it go blotchy, meaning I bought the glossy type and painted my '68 Mustang engine bay with it (two coates as per instructions) and when it all was said and done and dry, some spots were shinny and some were flat and dull. So I called the company up and they said sometimes it just does that? Say What?!


Quote:
Originally Posted by blindbug View Post
• You are using Phosphoric Acid to prep, and then applying POR 15, correct? I see concrete etcher at the local home improvement as Phosphoric Acid, but I'm not sure if that's the same, or if it is the same strength...
Best advice I can give you, is use it's two sister products, one is called Cleaner Degreaser (what I substitute Denatured Alcohol for) the other is Metal Prep (essentially really weak Phosphoric Acid (read the ingredients)). But if you use their stuff and follow their directions you have the best chance of getting proper results. This is not a cop out, I just suggest you try their stuff the first time around, and go from there.

Quote:
Originally Posted by blindbug View Post
Where'd you source your acid, and what strength is it (or do you even know)?
I have said this in the forum though I don't expect anybody to find it it's gotten so big, LOL, I buy mine at Home Depot, it's like $5 bucks for a gallon. Lessons Learned: Anything Home Depot sells is not true Automobile Quality, but it's good enuff. I use it straight up on really rusty bits and delute it with water on other bits, you will figure that out, it may eat some metal, it likes to ruin hood springs, lol.
Attached Images
 

Last edited by Gregski; 12-04-2017 at 10:53 PM.
Gregski is offline   Reply With Quote