Re: Family Project 65 C10 SWB "Old Blue"
More UPDATES!
We finished cleanup and assembly of the lower a-arms. For those wondering about how to put the lower a-arms together, this is how I did it:
-Rubber bushings go on small side in.
-Grease/lube everything
-Start the endcaps at the same time, turn in 1/2 turn at a time keeping the distance between the ears of the a-arm even with the end edges of the shaft the same (where the small part of the bushing seats).
-Keep turning the end caps 1/2 turn in until 100ft-lbs torque.
|