Re: 1958 SWB C4 Fleetline - NZ Build
With that in mind i decided to spend some time today finishing of the front c notches as I just kept leaving them in the "round too-it" basket.
while I was in there I decided to cut out the side of the damaged front chassis rail so i can weld a new piece in. As you can see I ended up having to reinforce the chassis rail with a 4x2 as the only thing holding the left front end up was the top of the chassis rail (refer pic)
no problems with the other side however and now I just need to get hold of my pesky welder to get it all in there
|