The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1968 GMC w/ NP 435

**Bob B.** · 02-21-2018, 04:09 AM

Yes, in a lot of GM trucks during the 60's are early 70's, particularly GMC's. Novak is good, I think the last time I built one I used www.drivetrain.com. Be careful ordering parts, there are MANY different versions of these. A very stout transmission, and there are both wide and close ratio versions. New Process was owned by Chrysler for a number of years, but they were an independent division and sold transmissions to many manufacturers. 435's were used by GM, Dodge, Ford, and International. New Process was sold off and merged with Muncie to form New Venture, which in turn got bought by Magna.

02-21-2018, 04:09 AM	#9
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,309	Re: 1968 GMC w/ NP 435 - Gasket Set Yes, in a lot of GM trucks during the 60's are early 70's, particularly GMC's. Novak is good, I think the last time I built one I used www.drivetrain.com. Be careful ordering parts, there are MANY different versions of these. A very stout transmission, and there are both wide and close ratio versions. New Process was owned by Chrysler for a number of years, but they were an independent division and sold transmissions to many manufacturers. 435's were used by GM, Dodge, Ford, and International. New Process was sold off and merged with Muncie to form New Venture, which in turn got bought by Magna. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.