The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kipps · 03-22-2018, 04:01 PM

Have a complete 2010 tahoe donor. 5.3 going into a squarebody.

Considering moving the gauges over to the square, but not sure if it's even possible.

If I understand correctly, the PCM sends data to the BCM, and the BCM outputs to the stepper motors in the instrument cluster. Is there a way to eliminate the BCM, or limit its function to just converting data from the PCM?

Any threads or suggestions are welcome!

03-22-2018, 04:01 PM	#1
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,099	2010 dash swap Have a complete 2010 tahoe donor. 5.3 going into a squarebody. Considering moving the gauges over to the square, but not sure if it's even possible. If I understand correctly, the PCM sends data to the BCM, and the BCM outputs to the stepper motors in the instrument cluster. Is there a way to eliminate the BCM, or limit its function to just converting data from the PCM? Any threads or suggestions are welcome!