Quote:
Originally Posted by Chevy Fleetside
It is hard to hide the wires going to the turn signals but you can get creative to do that. I used an aftermarket harness in my truck and an aftermarket gas pedal. I ran the new wires through the hole where the stock gas pedal exited the cab and ran the wires do the side of my engine block through a copper tube I bolted up. I used corvette style spark plug wires and ran them down the back of the heads along the engine block also. The headlight harness can be run under the left inner fender. You can maybe weld some conduit under there to run the wires through. I also located my battery under the bed. There are more pictures in my build thread. Link below in my sig.
|
I have a question for ya, how did you attack removing the battery indent from the inner fender? I keep thinking it's going to warp really bad and maybe I should flange the new piece and join them as a seam rather than welding it all? I am the king of oil canning stuff.3 good to fill the trim on my 49, not good