Re: 1972 C10 2wd M20 wont go into gear
Damn dangit dagnabbit.
Any tips or hints? Support engine with floor jack.
Grind, chisel, drill out rivets for crossmember.
Drop driveshaft.
Use tranny jack on tranny to lower.
Is that about it? Best way to deal with rivets?
Heard using a cut off wheel/angle air grinder to
X them and then is air chisel to chisel for 4 pie shaped pieces was not bad.
__________________
1972 C10 LWB 2WD
307 4 speed
Rescued from Field July 2017
|