Re: 1962 stepside project by realvc
For some reason this picture was not included in my latetest update. The trailing arms, coil springs, shocks, rear axle and rear bumper all had to be cut off. Since I don't have a torch I use an angle grinder to cut through the end of the bolts to split the nuts. The shocks are the only thing I got off with out having to cut. The big u bolts and the coil spring through bolts on the trailing arm were rusted in place and required some big time hammer persuasion to let go from together to apart.
I know how everyone enjoys rusty iron on here, so this one is for you
|