The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rich84 · 05-13-2018, 03:48 PM

It is a new harness from fuel injection connection. I have had good luck with their harnesses in the past. It’s a Bosch 15284 that he recommends. It does go closed loop and seems to run pretty good but I have not taken it on the road yet. I got the air intake system ironed out so I can rule out any ummtered air getting past the MAF. I suspect a vacuum leak because I also threw a lien code for both banks. I had received this code when the motor was still running in my van.

05-13-2018, 03:48 PM	#7
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,665	Re: 6.0 Swap Stumbling Idle It is a new harness from fuel injection connection. I have had good luck with their harnesses in the past. It’s a Bosch 15284 that he recommends. It does go closed loop and seems to run pretty good but I have not taken it on the road yet. I got the air intake system ironed out so I can rule out any ummtered air getting past the MAF. I suspect a vacuum leak because I also threw a lien code for both banks. I had received this code when the motor was still running in my van.