The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - driveshaft angles with IFS and Dirty dingo

binford · 05-21-2018, 10:38 AM

It looks like the axle is 5 degrees pointing up

Most drive trains slope down 3-5 degrees to the rear end.

When you give it gas the rear end will tilt up some

A driveline that is equal and opposite is what you want. Meaning axle pointing up 5 degrees with the other end pointing down 5 degrees. If one shaft is 0 to 0 that works too

05-21-2018, 10:38 AM	#2
binford Registered User Join Date: Aug 2004 Location: Sacramento Ca Posts: 126	Re: driveshaft angles with IFS and Dirty dingo It looks like the axle is 5 degrees pointing up Most drive trains slope down 3-5 degrees to the rear end. When you give it gas the rear end will tilt up some A driveline that is equal and opposite is what you want. Meaning axle pointing up 5 degrees with the other end pointing down 5 degrees. If one shaft is 0 to 0 that works too Last edited by binford; 05-21-2018 at 10:51 AM.