The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - A VSS/Dakota digital question for someone smarter than me..

davepl · 06-01-2018, 03:35 AM

I had to reprogram my ECM because I ordered the automatic version of the LS3 crate motor to get the rebate, then reprogrammed it to be the manual trans. Along the way I had to edit the pulse per mile on the speedo input, so just FYI that's a configurable input. So long as you know the number of pulses per mile for the speed sensor you're using, you can adjust it to match.

Side note - I see all of the Dakota Digital products use the same little "project box" with an LED display and screw terminal hookup. Anyone ever seen that as a standard project box you can buy?

06-01-2018, 03:35 AM	#3
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: A VSS/Dakota digital question for someone smarter than me.. I had to reprogram my ECM because I ordered the automatic version of the LS3 crate motor to get the rebate, then reprogrammed it to be the manual trans. Along the way I had to edit the pulse per mile on the speedo input, so just FYI that's a configurable input. So long as you know the number of pulses per mile for the speed sensor you're using, you can adjust it to match. Side note - I see all of the Dakota Digital products use the same little "project box" with an LED display and screw terminal hookup. Anyone ever seen that as a standard project box you can buy? __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible