Re: Frankentruck
One of my classes during Senior year of high school gave me the opportunity to learn a little CAD and of course, I decided to design a 63 grille.
This entire time, my wipers were not working. I finally tracked it down to the same issue I was having with the brake lights, the fuse block. We ended up getting a factory replacement under dash harness to replace the rusty fuse block. The rest of the wiring was ok, so it was left as is. Everything works on the truck now except for the horn, and that is something in the steering wheel that I haven't pulled off to fix.
I continued to just drive the truck around, and take it to a couple of shows.
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|