Re: LT1 GenV swap
Slow progress, but 2 tubes fully welded, 3rd all tacked and ready to be welded. Ran out of time tonight.
Fits pretty good
Time got divided between another project. Got a good deal on a set of the Wilwood c-10 pro spindle kit. With hours of research and cad work and think I got a working setup. 330mm x26mm /13" x 1.25 rotor on the C6 Corvette calipers. Corvette rotors wont work on these massive hubs. Got another rotor in mind that only requires a small mod. It looks like it may not clear my 17" torq lite American racing wheels.. they did a goofy stupid inner barrel design and it has such an angle it makes putting wheel weights on a bear.. so if the 13" setup doesn't fit, just gonna use the larger 350mm / 13.7" rotor and c6 caliper.
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|