Quote:
Originally Posted by Palf70Step
Moving quick! Looking forward to the medical procedure pics.
|
Thanks Bill
Sharpie in hand, time to trace the patch panel out.
While all this was going on, Security cat had decided to get comfy, on the job.
First welding job was to do then30mm upright for the side kick panel, they rust out in the bottom corner and you need to replace that steel too.
Easier to weld in some metal, than another fold, if your steel is not that wide.
Technically the outside, and awaiting weld through primer before it all gets welded in.
Inside
And in place.
I will probably only cut the floor and weld this in by next weekend.
Unless I get time, which is unlikely as it’s another week from a dark place.
Later.