|
Re: 3speed problem: clutch does not engage
The truck will go into gear just fine without the engine running. Thre is no presure what so ever on the clutch pedal, as if the clutch rod were not connected to the fork. Z bar has plenty of clearance now and moves freely when pedal is pressed. I havent removed the dust cover as im no transmission expert.
After thinking about it for a while, i feel like the clutch finally wore out. Someone had put a 1/2 " socket on the end of the clutch rod to lengthen it and get adaquate pedal feel. And the clutch rod was adjusted all yhe way out. Any thoughts?
|