The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*YoungPup1977* · 02-16-2019, 04:38 PM

Replace the clutch disc, pressure plate, TO bearing and the pilot bearing which is in the rear of the crankshaft. Pull the flywheel off and have it resurfaced. Make sure you use the clutch disc alignment tool when installing the new clutch. Good luck to you.

02-16-2019, 04:38 PM	#7
YoungPup1977 Account Suspended Join Date: Jun 2015 Location: No longer here Posts: 1,000	Re: 3speed problem: clutch does not engage Replace the clutch disc, pressure plate, TO bearing and the pilot bearing which is in the rear of the crankshaft. Pull the flywheel off and have it resurfaced. Make sure you use the clutch disc alignment tool when installing the new clutch. Good luck to you.