Quote:
Originally Posted by Kronald_70GMC
Looks great man! Hey I got a favour to ask you. Do you think you could pull the measurements between the two front cab mount holes, center to center, and the two rear cab mount holes, again center to center? I found on another thread that says they are supposed to be 37-1/2" at the rear and 41-1/2" at the front. My rear measures 37-3/8" which is fine, but I'm getting 40-5/8" in the front. Really hoping that what I was reading is just a typo or something as I have no idea where I could have possibly lost 7/8". Thanks
|
Ok, just went out and pulled my measurements and here is what I got:
1970 cab and frame
Front = 40 13/16
Rear = 37 5/8
What I did was used a tape measure, but to be more accurate I skipped the first inch and started on the 1" mark on tape, and then found my measurement. It was easier to line up that 1" mark line than trying to figure out the metal tip on the end of the tape
I then measured my frame it is very close to the same measurements as my cab. Only an 1/16 to 1/8 inch difference from frame to cab.
Hope that helps!