[roll_the_dice]

Today I started bolting up the transmission. Put the new flywheel on, clutch kit, along with the bellhousing. I was missing 2 bolts for the hydraulic throwout bearing to attach to the transmission. Will pick those up and finish getting the transmission mated to the engine.

I also cut most of the pallet away from the engine so that cleaned up a lot of space in the garage also..which I was stoked about. I covered the engine back up with a tarp, but was nice to see her again! Won't be long now until it all gets mounted in the truck.

Probably going to change out my valve covers soon too...to something better looking.