Re: LT1 GenV swap
Notch in frame was for LS ac line clearance.. it got welded up.
All the tube was scraps in the pictures from old evaporator cores that were machine bent for tight radius.. there is a cool tool to bend ac tube bit not about to invest a grand to bend my ac lines like factory.
Shows stock discharge line that requires the "twist" so the sensor isn't so close to the frame
Shows the 90* scrap bend and tube nut brazed together and taped up.
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|