The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PICKMUP** · 07-10-2019, 03:59 PM

Pull the handle and the hood opens 1"-2". No prying or chipping paint or grills.
Bolts to your stock hood without any modifications or drilling.
I just finished a new batch and the cost of everything I use went up!

I have to make or modify most of the components.

Springs: cut, heat, bend, grind/polish. ***(2020: new custom made stainless springs).
Retainers: cut, grind, sand and punch. ***(Corvette=$$$).
Straps: cut, grind/sand and drill.
Hardware
Instructions

These little suckers are a pain in the butt to build. Please feel free to copy or duplicate these, if you like.

2020 price= $70 a set---shipped

NOTE: The "hood latch" assy is not included...use your existing one.

07-10-2019, 03:59 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: Hood poppers Pull the handle and the hood opens 1"-2". No prying or chipping paint or grills. Bolts to your stock hood without any modifications or drilling. I just finished a new batch and the cost of everything I use went up! I have to make or modify most of the components. Springs: cut, heat, bend, grind/polish. *(2020: new custom made stainless springs). Retainers: cut, grind, sand and punch. (Corvette=$$$). Straps: cut, grind/sand and drill. Hardware Instructions These little suckers are a pain in the butt to build. Please feel free to copy or duplicate these, if you like. 2020 price= $70 a set---shipped* NOTE: The "hood latch" assy is not included...use your existing one. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 06-28-2020 at 02:35 PM.